orange2022 / src / ZLAC8015D_python /
@koki koki authored on 20 Sep 2022
..
docs update 2 years ago
examples update 2 years ago
images update 2 years ago
zlac8015d update 2 years ago
.gitignore update 2 years ago
README.md update 2 years ago
setup.py update 2 years ago
README.md

A Python package of ZLAC8015D AC Servo Driver

This is a simple python package by using pymodbus to be able to access registers of ZLAC8015D.

You can find more detail of ZLAC8015D on their official site here.

Hardware

ZLAC8015D is only compatible with dual 8 inch motors size.

Along with the driver, you will need to have RS485-USB converter to plug it on your PC. Please check on the following diagram.

Installation

#1. Install dependecies
## For python2
sudo pip install pymodbus
## or python3
sudo pip3 install pymodbus

#2. Install this package
## For python2
sudo python setup.py install
## or python3
sudo python3 setup.py install

#3. add user to dialout group
sudo usermod -a -G dialout $USER

Features

  • Velocity control, we can send command RPMs and also read feedback RPMs from the motors, please check on test_speed_control.py

  • Position control, we can send how much angle or even direct distance to travel, in case of we are using default 8 inch wheel the circumference distance would be 0.655 meters. Please check on test_position_control.py.

Those two control modes can be switched during operation, the initialization step has to be done every times when changed to another mode.

Remark

get_rpm() can be called in velocity control mode, but couldn't get feedback if in position control mode.

get_wheels_travelled() can be called in both modes.

modbus_fail_read_handler() is a helper function to handle failure read because some there is error of ModbusIOException.

Registers

For more information of data registers and example packets, please check on docs.